sata hdd interface data & power protection te schematic above illustrates the application protection and does not constitute the complete circuit design. customers should verify actual device performance in their specifc applications. mf-msmf075/24-2 smbj5.0a cddfn10-0524p solution products asia-pacifc: tel +886-2 256 241 17 fax +886-2 256 241 16 bourns? portnote? solutions provide protection recommendations for typical port threats. for more information, go to: www.bourns.com or email: protection@bourns.com americas: tel +1-951 781-5500 fax +1-951 781-5700 europe: tel +41-(0)41 768 55 55 fax +41-(0)41 768 55 10 compliance iec 61000-4-2 esd level 4, 8 kv alternate recommendations hdd powered from 12 vdc would instead use a model smbj12a tvs diode on the power line. beneft tis solution provides surge, inrush and reverse polarity protection on the power line and esd protection on the data lines. objective sata hard disk drives are typically powered from 5 vdc. te power line needs transient, inrush and reverse polarity protection. tere are also data lines susceptible to damage from esd events when the drive is not connected. solution 1 multifuse? pptc resettable fuse: mf-msmf075/24-2 1 tvs diode: smbj5.0a 1 tvs diode array: cddfn10-0524p copyright? 2012 ? bourns, inc. ? 6/12 ? e/cpk1109 ? portnote is a registered service mark of bourns, inc. bourns and multifuse are registered trademarks of bourns, inc. in the u.s. and other countries. pn-designkit-28 design kit mf-msmf075/24 cddfn10-0524p hdd device sata / e-sata connector vdd rx+ rx- tx+ tx- smbj5.0a
|
